поискавой системы для электроныых деталей
  Russian  ▼
ALLDATASHEETRU.COM

X  

ACT4910QW датащи(PDF) 18 Page - Active-Semi, Inc

номер детали ACT4910QW
подробное описание детали  Power Loss Protection with 6A eFuse
Download  34 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
производитель  ACTIVE-SEMI [Active-Semi, Inc]
домашняя страница  http://www.active-semi.com
Logo ACTIVE-SEMI - Active-Semi, Inc

ACT4910QW датащи(HTML) 18 Page - Active-Semi, Inc

Back Button ACT4910QW Datasheet HTML 14Page - Active-Semi, Inc ACT4910QW Datasheet HTML 15Page - Active-Semi, Inc ACT4910QW Datasheet HTML 16Page - Active-Semi, Inc ACT4910QW Datasheet HTML 17Page - Active-Semi, Inc ACT4910QW Datasheet HTML 18Page - Active-Semi, Inc ACT4910QW Datasheet HTML 19Page - Active-Semi, Inc ACT4910QW Datasheet HTML 20Page - Active-Semi, Inc ACT4910QW Datasheet HTML 21Page - Active-Semi, Inc ACT4910QW Datasheet HTML 22Page - Active-Semi, Inc Next Button
Zoom Inzoom in Zoom Outzoom out
 18 / 34 page
background image
ACT4910QW
Rev 1.0, 15-Sept-2017
Innovative PowerTM
www.active-semi.com
ActiveSwitcherTM is a trademark of Active-Semi
Copyright © 2017 Active-Semi, Inc.
18
Pin Functions
VIN
VIN is the input the eFuse. Connect a 0.1uF ceramic
capacitor between VIN and PGND. VIN is directly
connected to VOUT in normal operation. The eFuse
disconnects VIN from VOUT when the IC enters
supplement mode.
EN
The EN pin is the ACT4910 enable input used to turn
the eFuse on or off. It provides both overvoltage and
undervoltage protection thresholds. The EN pin
contains a precision comparator with hysteresis. It can
be directly driven from a digital input to turn the eFuse
on and off. The EN pin can also be used with a resistor
divider from VIN to VSS to program an eFuse startup
voltage higher than the IC’s UVLO value. The EN pin
also contains an overvoltage comparator. The eFuse
turns on when the input EN pin goes above the
EN_UV_REF threshold. Once the eFuse is on, it turns
off and enters supplement mode if the EN pin goes
above the EN_OV_REF threshold or below the
EN_UV_REF threshold.
The EN pin should not be left floating. It can be driven
from standard logic signals greater than EN_UV_REF.
It can also be driven with open-drain logic to provide.
When driving it with an open-drain, ensure that the
pullup voltage is not higher than the EN_OV_REF
setting.
EN_UV_REF is fixed at 0.64V. However, the
EN_OV_REF can be programmed by I2C bits
EN_OV_REF [2:0]. The default EN_OV_REF voltage is
set by the IC’s CMI.
Table 2: Over Voltage Reference Settings
EN_OV_REF[2:0]
OV Threshold (V)
000
Disabled
001
0.82
010
0.92
011
1.00
100
1.08
101
1.16
110
1.24
111
1.32
STR
STR is the output to the storage capacitor bank. In
normal operation the internal boost converter charges
the storage capacitors through the STR pin. When the
IC enters supplement mode, the internal buck converter
uses the STR pin as its input to power the system. The
STR pin typically has a 22uF or greater ceramic
capacitor. See the Buck Converter section for more
information.
IRQ—Interrupt
ACT4910 has an interrupt pin to inform the host of any
fault conditions. In general, any IC function with a status
bit asserts nIRQ if the status changes. The status
changes can be masked by setting the corresponding
register bits. If nIRQ is asserted low, the fault must be
read before the IC deasserts nIRQ. If the fault remains
after reading the status bits, nIRQ remains asserted.
The below status changes will set the IRQ:
Input overvoltage, undervoltage
Thermal warning, thermal shutdown
eFuse VIN to VOUT over limits
eFuse current warning and limit
Storage capacitor overvoltage, undervoltage
Supplemental mode active
Buck operation faults
Buck undervoltage shutdown
REF LDO undervoltage
ADC data is ready
ADC beyond set limits
nIRQ is an open-drain output and should be pulled up
to an appropriate supply voltage with a 10kΩ or greater
pull-up resistor.
SCL, SDA
SCL and SDA are the I2C clock and data pins to the IC
They have standard I2C functionality. They are open-
drain outputs and each require a pull-up resistor. The
pull-up resistor is typically tied to the system’s uP IO
pins. The pullup voltage can range from 1.8V to 5.0V.
REF
The REF pin is an internal bias voltage output pin.
Connect a 1µF capacitor between REF and VSS. Do
not apply an external load to the REF pin.
BSET
BSET sets the boost converter output voltage. The
output voltage is a function of both a resistor connected
between BSET and VSS as well as internal I2C register


Аналогичный номер детали - ACT4910QW

производительномер деталидатащиподробное описание детали
logo
Active-Semi, Inc
ACT4911QW ACTIVE-SEMI-ACT4911QW Datasheet
3Mb / 33P
   Power Loss Protection with 6A eFuse
Rev 1.0, 15-Sept-2017
ACT4911QW301-T ACTIVE-SEMI-ACT4911QW301-T Datasheet
3Mb / 33P
   Power Loss Protection with 6A eFuse
Rev 1.0, 15-Sept-2017
More results

Аналогичное описание - ACT4910QW

производительномер деталидатащиподробное описание детали
logo
Active-Semi, Inc
ACT4911QW ACTIVE-SEMI-ACT4911QW Datasheet
3Mb / 33P
   Power Loss Protection with 6A eFuse
Rev 1.0, 15-Sept-2017
ACT4921QI ACTIVE-SEMI-ACT4921QI Datasheet
3Mb / 35P
   Power Loss Protection with 6A eFuse
Rev 1.0, 18-Jan-2018
logo
Texas Instruments
TPS25942A TI1-TPS25942A Datasheet
3Mb / 54P
[Old version datasheet]   5A eFuse Power MUX with Multiple Protection Modes
logo
Analog Devices
MAX17527A AD-MAX17527A Datasheet
1Mb / 32P
   5.5V to 60V, 6A Power Limiter with OV, UV, Reverse Polarity, Loss of Ground Protection
Rev 0; 11/22
logo
Littelfuse
LS2406ERQ23 LITTELFUSE-LS2406ERQ23 Datasheet
1Mb / 14P
   28V, 6A eFuse with True Reverse Blocking and Fast Role Swap
GD. 09/26/22
LS24062RQ23 LITTELFUSE-LS24062RQ23 Datasheet
1Mb / 16P
   28V 6A Bidirectional eFuse with Dual Port Independent Current Limit Setting
2022 Littelfuse, Inc.
logo
Texas Instruments
TPS25940-Q1 TI1-TPS25940-Q1 Datasheet
3Mb / 46P
[Old version datasheet]   18-V eFuse with Integrated Short-to-Battery Protection
TPS259250 TI1-TPS259250 Datasheet
1Mb / 35P
[Old version datasheet]   Simple 5V/12V eFuse Protection Switches
TPS2663 TI1-TPS2663_19 Datasheet
4Mb / 52P
[Old version datasheet]   60-V, 6-A Power limiting, surge protection industrial eFuse
TPS259230 TI1-TPS259230 Datasheet
1Mb / 33P
[Old version datasheet]   5V eFuse with Over Voltage Protection and Blocking FET Control
More results


Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34


датащи скачать

Go To PDF Page


ссылки URL




Конфиденциальность
ALLDATASHEETRU.COM
Вашему бизинису помогли Аллдатащит?  [ DONATE ] 

Что такое Аллдатащит   |   реклама   |   контакт   |   Конфиденциальность   |   обмен ссыками   |   поиск по производителю
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com