поискавой системы для электроныых деталей |
|
S342N100J252CT датащи(PDF) 7 Page - WALSIN TECHNOLOGY CORPORATION |
|
S342N100J252CT датащи(HTML) 7 Page - WALSIN TECHNOLOGY CORPORATION |
7 / 11 page Multilayer Ceramic Capacitors Approval Sheet Page 7 of 11 ASC Safety Certified X2_(S3)_011Y_AS May. 2019 No. Item Standard Method Test Condition Requirements 10. Humidity (Damp Heat) Steady State IEC 60384-14 4.12 * Test temp. : 40±2°C. * Humidity : 90~95% RH. * Test time : 500 +24/-0hrs. * Applied voltage : 250Vac. * Measurement to be made after keeping at room temp. for 24±2 hrs (Class I) and 48±4 hrs (Class II). * No remarkable damage. Dielectr ic I.R. Cap. Change Q/D.F. Class I (C0G) ≥1G or RxC ≥ 25 -F, whichever is smaller Within ±3.0% or ±2pF, whichever is larger ≤0.25% Class II (X7R) Within ±15% ≤2.0(D.F.) × initial requireme nt 11. Passive Flammability IEC 60384-14 4.17 IEC 60384-1 4.38 * Volume sample: 21.56 mm 3 * Flame exposure time: 5 sec Max. * Category of flammability : C. * Capacitor didn’t burn at all. 12. Active Flammability IEC 60384-21/22 4.18 * The capacitors applied UR (250Vac). Then each sample shall be subjected to 20 discharges from a tank capacitor, charge to a voltage that, when discharged, plase Ui 2500V for X2, across the capacitor under test. The interval between successive discharges shall be 5 sec. * The cheese cloth shall not burn with a flame. 13. High Temperature Load (Endurance) IEC 60384-14 4.14 * Impulse Voltage : Each individual capacitor shall be subjected to a Vp = 2.5KV (X2 Class Impulse 2.5KV) impulse for three times before applied to endurance test. * Test temp. : 125±3°C. * Test time: 1000 +48/-0 hrs. * Applied voltage : X capacitor: 1.25UR (312.5Vac). Once every hour the voltage shall be increased to 1000Vrms for 0.1 sec. * Measurement to be made after keeping at room temp. for 24±2 hrs (Class I) and 48±4 hrs (Class II). * Appearance : No mechanical damage. * Cap. change : C0G within ±5% or ±0.5pF, whichever is larger. X7R within ±20%. * D.F. value : C0G ≤0.25%. X7R ≤5.0%. * I.R. ≥1G . * Dielectric strength satisfies the specified initial value. 14. Resistance to Flexure of Substrate IEC 60384-21/22 4.8 * Capacitors mounted on a substrate. The board shall be bent 1mm with a rate of 1mm/sec. * No remarkable damage. Dielectric Cap. Change Class I (C0G) Within ±3.0% or ±2pF, whichever is larger Class II (X7R) Within ±12.5% (This capacitance change means the change of capacitance under specified flexure of substrate from the capacitance measured before the test) R = 230 20 50 45 ±1 45 ±1 1mm |
Аналогичный номер детали - S342N100J252CT |
|
Аналогичное описание - S342N100J252CT |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |