SL2309ZC-1HT datasheet(8/12 Pages) ETC2

номер детали	SL2309ZC-1HT

подробное описание детали	Low Jitter and Skew 10 to 140 MHz Zero Delay Buffer (ZDB)

Download	12 Pages

Scroll/Zoom	100%

производитель	ETC2 [List of Unclassifed Manufacturers]

домашняя страница

Logo

8 / 12 page

Rev 1.1, May 29, 2007

Page 8 of 12

SL2309

External Components & Design Considerations

Typical Application Schematic

Comments and Recommendations

Decoupling Capacitor:

A decoupling capacitor of 0.1μF must be used between VDD and VSS pins. Place the capacitor s

on the component side of the PCB as close to the VDD pins as possible. The PCB trace to the VDD pin and to the GND

via should be kept as short as possible. Do not use vias between the decoupling capacitor and the VDD pin.

Series Termination Resistor

: A series termination resistor is recommended if the distance between the output clocks and

the load is over 1 ½ inch. The nominal impedance of the clock outputs is given on the page 4. Place the series termination

resistors as close to the clock outputs as possible.

Zero Delay and Skew Control:

All outputs and CLKIN pins should be loaded with the same load to achieve “Zero Delay”

between the CLKIN and the outputs. The CLKOUT pin is connected to CLKIN internally on-chip for feedback to PLL, and

sees an additional 2 pF load with respect to Bank A and B clocks. For applications requiring zero input/output delay, the

load at the all output pins including the CLKOUT pin must be the same. If any delay adjustment is required, the

capacitance at the CLKOUT pin could be increased or decreased to increase or decrease the delay between Bank A and

B clocks and CLKIN.

For minimum pin-to-pin skew, the external load at all the Bank A and B clocks must be the same.

Аналогичный номер детали - SL2309ZC-1HT

производитель	номер детали	датащи	подробное описание детали
SpectraLinear Inc	SL2309ZC-1HT	142Kb / 12P	Low Jitter and Skew 10 to 140MHz Zero Delay Buffer (ZDB)

производитель	номер детали	датащи	подробное описание детали
SpectraLinear Inc	SL2305	167Kb / 11P	Low Jitter and Skew 10 to 140 MHz Zero Delay Buffer (ZDB)
SpectraLinear Inc	SL23EP04	163Kb / 14P	Low Jitter and Skew 10 to 220 MHz Zero Delay Buffer(ZDB)
Silicon Laboratories	SL2305	156Kb / 11P	Low Jitter and Skew 10 to 140 MHz Zero Delay Buffer
Silicon Laboratories	SL2309	562Kb / 13P	Low Jitter and Skew 10 to 140 MHz Zero Delay Buffer
SpectraLinear Inc	SL2309	142Kb / 12P	Low Jitter and Skew 10 to 140MHz Zero Delay Buffer (ZDB)
	SL23EP05	150Kb / 11P	Low Jitter and Skew 10 to 220MHz Zero Delay Buffer (ZDB)
	SL23EP08	173Kb / 18P	Low Jitter and Skew 10 to 220MHz Zero Delay Buffer (ZDB)
	SL23EP09	156Kb / 13P	Low Jitter and Skew 10 to 220MHz Zero Delay Buffer (ZDB)
Silicon Laboratories	SL23EP05	284Kb / 15P	LOW JITTER AND SKEW 10 TO 220 MHZ ZERO DELAY BUFFER
Silicon Laboratories	SL23EP08	227Kb / 15P	Low Jitter and Skew 10 to 220 MHz Zero Delay Buffer