поискавой системы для электроныых деталей |
|
STC4.7-4C1 датащи(PDF) 6 Page - Vishay Siliconix |
|
STC4.7-4C1 датащи(HTML) 6 Page - Vishay Siliconix |
6 / 7 page STC Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-Polar www.vishay.com For technical questions, contact: tantalum@vishay.com Document Number: 43006 96 Revision: 10-Dec-07 PERFORMANCE AND RELIABILITY The capacitors are tested in accordance with MIL-PRF- 49137, with specific requirements as follows: Temperature Stability: When tested per MIL-PRF-49137/ 6, capacitance shall be within ± 15 % at - 55 °C and 85 °C, and ± 10 % at 25 °C after exposure to temperature extremes. DF shall be within 200 % of initial limit at - 55 °C, 150 % of initial limit at 85 °C, and meet the initial at 25 °C. DCL shall be within 10 x initial limit at 85 °C, and meet the initial limit at 25 °C. Moisture Resistance: (per Method 106 of MIL-STD-202) After 10 cycles of 24 h at 25 °C to 65 °C and 80 - 98 % RH; capacitance shall be within ± 15 % of initial value, DF within 1.5 x initial limit and leakage within 3 x initial limit. Life: (per Method 108 of MIL-STD-202) after 1000 h at 85 °C and rated voltage; capacitance shall be within ± 10 % of initial limit, DF within initial limits, and leakage within 200 % of initial limit. Surge Voltage: (per MIL-PRF-49317) After 1000 cycles at 85 °C and 1.3 x WVDC; capacitance shall be within ± 10 % of initial limit, DF and leakage within initial limits. Resistance to Soldering Heat: (per Method 210 of MIL-STD-202, Condition B) After immersion in 260 °C molten solder to within a 1/4” of the body of the unit, there shall be no evidence of mechanical or electrical degradation. Solderability: (per Method 208 of MIL-STD-202) After dipping leads in 235 °C molten solder to within 0.125" of the body of the unit, the solder shall cover 95 % of the lead surface. Terminal Strength: (per Method 211 of MIL-STD-202) After the following test there shall be no loosening of the terminals or permanent damage to the terminals. Test Condition A: (Pull Test) 0.010" leads withstand 1 pound, 0.016" leads 2 pounds and 0.007" leads 1/2 pound. Test Condition C: (Bend Test) All leads shall withstand 3 - 90° bends with a 1/2 pound applied force. CAPACITANCE VS. TEMPERATURE IMPEDANCE VS. FREQUENCY LEAKAGE CURRENT - TEMPERATURE 1.0 0.1 0.01 - 40 - 10 0 + 85 + 20 (MFD-WVDC) TEMPERATURE °C 1 µF-20 V 100 µF-10 V + 10 + 5 0 - 5 - 10 - 40 - 10 + 25 + 100 + 85 (MFD-WVDC) SPECIFICA TION SPECIFICA TION TYPICAL 100 µF - 10 V 100 µF - 10 V 1 µH - 20 V TEMPERATURE °C 100 500 1 2 5 10 20 50 100 500 1 2 5 10 Hz kHz FREQUENCY kHz MHz (MFD-WVDC) 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1K 2K 5K 10K 0.047 µF-20 V 0.047 µF-20 V 0.047 µF-35 V 0.047 µF-3 5 V 4.7 µF-10 V 4.7 µF-20 V 0.047 µF-5 0 V 4.7 µF-20 V |
Аналогичный номер детали - STC4.7-4C1 |
|
Аналогичное описание - STC4.7-4C1 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |