SN54AHC04, SN74AHC04

HEX INVERTERS

SCLS231M – OCTOBER 1995 – REVISED JULY 2003

2

POST OFFICE BOX 655303

logic diagram, each inverter (positive logic)

Y

A

–0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±25 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

86

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(see Note 2): DB package

96

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(see Note 2): DGV package

127

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(see Note 2): N package

80

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(see Note 2): NS package

76

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(see Note 2): PW package

113

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(see Note 3): RGY package

47

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. The package thermal impedance is calculated in accordance with JESD 51-7.

3. The package thermal impedance is calculated in accordance with JESD 51-5.