TL7702A, TL7705A, TL7709A, TL7712A, TL7715A

SUPPLY-VOLTAGE SUPERVISORS

SLVS028E – APRIL 1983 – REVISED JULY 1999

3

POST OFFICE BOX 655303

20 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–0.3 V to 20 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–0.3 V to 6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TL7705A

–0.3 V to 20 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TL7709A

–0.3 V to 20 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TL7712A, TL7715A

–0.3 V to 20 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–30 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

97

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

P package

127

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package

260

°C

. . . . . . . . . . . . . . . . .

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values are with respect to the network ground terminal.

2. For proper operation of the TL7702A, the voltage applied to the SENSE terminal should not exceed VCC – 1 V or 6 V, whichever

is less.

4. The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace

length of zero.

recommended operating conditions

MIN

MAX

UNIT

Supply voltage, VCC

3.5

18

V

High-level input voltage at RESIN, VIH

2

V

Low-level input voltage at RESIN, VIL

0.6

V

TL7702A

0

See Note 2

TL7705A

0

10

Input voltage, SENSE, VI

TL7709A

0

15

V

TL7712A

0

20

TL7715A

0

20

High-level output current, RESET, IOH

–16

mA

Low-level output current, RESET, IOL

16

mA

Timing capacitor, CT

10

µF

Operating free air temperature range TA

TL77xxAC

0

70

°C

Operating free-air temperature range, TA

TL77xxAI

–40

85

°C

NOTE 2: For proper operation of the TL7702A, the voltage applied to the SENSE terminal should not exceed VCC – 1 V or 6 V, whichever is less.