11

Ver.4.0

LD1960A

9 SEGMENT X 7 GRID LED Driver with key scan

COMMAND 2 : DATA SETTING COMMAND

The data setting command consists of data write mode setting, address increment mode setting

and mode setting . And the default of b3 to b0 are all “0” for power on.

The Data write mode settings have 2bit (b1,b0) for writing data to display mode and read key scan

data. And address increment mode setting has 1bit (b2) for selecting address Increment or fixed.

And 3bits(b5 ~ b3) should be fixed „000‟ at any case. The command bits (b7,b6) are “0”,”1” for

COMMAND2.