поискавой системы для электроныых деталей |
|
ISL22512WFRU10Z-TK датащи(PDF) 10 Page - Intersil Corporation |
|
ISL22512WFRU10Z-TK датащи(HTML) 10 Page - Intersil Corporation |
10 / 12 page 10 FN6679.3 October 12, 2015 Shutdown Mode The ISL22512 enters into Shutdown Mode if both PU and PD inputs are kept LOW for 2 seconds. In this mode, the resistors array is totally disconnected from its RH pin and the wiper is moved to position closest to RL pin, as shown in Figure 13. Note, that PU and PD inputs must be pulled LOW within tDB time window of 15ms, see “Shutdown Mode Timing” on page 6. Otherwise all command will be ignored till both inputs will be released. Holding either PU, PD or ASE input LOW for more than 15ms will exit shutdown mode and return wiper to prior shutdown position. If PU or PD will be held LOW for more than 250ms, the ISL22512 will start auto-increment or auto-decrement of wiper position. RTOTAL with VCC Removed The end- to-end resistance of the array will fluctuate once VCC is removed. About Intersil Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets. For the most updated datasheet, application notes, related documentation and related parts, please see the respective product information page found at www.intersil.com. You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask. Reliability reports are also available from our website at www.intersil.com/support. RL RW RH FIGURE 13. DCP CONNECTION IN SHUTDOWN MODE Revision History The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you have the latest Rev. DATE REVISION CHANGE 10/12/15 FN6679.3 Updated the Ordering Information Table on page 2. Added About Intersil section. Updated the Package Outline Drawing M8.15 to the latest revision. Changes are as follows: -Updated to new POD format by removing table and moving dimensions onto drawing and adding land pattern. -Changed in Typical Recommended Land Pattern the following: 2.41(0.095) to 2.20(0.087) 0.76 (0.030) to 0.60(0.023) 0.200 to 5.20(0.205) -Changed Note 1 “1982” to “1994” 07/06/09 FN6679.2 Added reliability information on page 1 under Features and EEPROM Specifications in DC Electrical Spec Table. Changed Tja for 8 LD SOIC from “120” to “125” Added Revision History 07/17/08 FN6679.1 1. Removed U option specs from table as there is no U option for this device. 2. Updated Pb-free note to new verbiage. 03/24/08 FN6679.0 Initial Release to web ISL22512 |
Аналогичный номер детали - ISL22512WFRU10Z-TK |
|
Аналогичное описание - ISL22512WFRU10Z-TK |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |