поискавой системы для электроныых деталей |
|
TMP512AIDR датащи(PDF) 2 Page - Texas Instruments |
|
|
TMP512AIDR датащи(HTML) 2 Page - Texas Instruments |
2 / 61 page TMP512 TMP513 SBOS491A – JUNE 2010 – REVISED MAY 2011 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGE INFORMATION(1) PRODUCT PACKAGE-LEAD PACKAGE DESIGNATOR PACKAGE MARKING SO-14 D TMP512A TMP512 QFN-16 RSA TMP512A SO-16 D TMP513A TMP513 QFN-16 RSA TMP513A (1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or visit the TMP512/TMP513 product folder at www.ti.com. ABSOLUTE MAXIMUM RATINGS (1) Over operating free-air temperature range (unless otherwise noted). TMP512, TMP513 UNIT Supply Voltage, V+ 26 V Voltage GND – 0.3 to +6 V Filter C Current 10 mA Differential (VIN+) – (VIN–) (2) –26 to +26 V Analog Inputs, VIN+, VIN– Common-Mode –0.3 to +26 V Open-Drain Digital Outputs GND – 0.3 to +6 V GPIO, DXP, DXN GND – 0.3 to V+ + 0.3 V Input Current Into Any Pin 5 mA Open-Drain Digital Output Current 10 mA Storage Temperature –65 to +150 °C Junction Temperature +150 °C Human Body Model (HBM) 2000 V ESD Ratings Charged-Device Model (CDM) 1000 V Machine Model (MM) 150 V (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. (2) VIN+ and VIN– may have a differential voltage of –26V to +26V; however, the voltage at these pins must not exceed the range –0.3V to +26V. 2 Copyright © 2010–2011, Texas Instruments Incorporated |
Аналогичный номер детали - TMP512AIDR |
|
Аналогичное описание - TMP512AIDR |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |