TPD4F202, TPD6F202

www.ti.com

SLLS800A – JUNE 2010 – REVISED DECEMBER 2015

8.2.2 Detailed Design Procedure

To begin the design process, some design parameters must be decided; the designer needs to know the

operating frequency and the signal range on all the protected lines.

8.2.2.1 Signal Range on All Protected Lines

The TPD6F202 has 6 identical protection channels for signal lines. All I/O pins will support a signal range from 0

to 5.5 V.

8.2.2.2 Data Rate

The TPD6F202 has a 108-MHz, –3-dB bandwidth, which supports the data rate for this display.

8.2.2.3 ESD Protection Level

The contact and air-gap ratings of ± 25 kV for TPD6F202 exceeds the IEC 61000-4-2 Level 4 rating of ± 8-kV

contact and ± 15-kV air-gap ratings.

8.2.3 Application Curve

Figure 8. Frequency Response Data (0-V Bias)

9 Power Supply Recommendations

The TPDxF202 device is a passive ESD-protection device, and therefore, does not require a power supply. Take

care to avoid violating the maximum-voltage specification to ensure that the device functions properly. The IO

lines can tolerate up to 6-V DC.

Copyright © 2010–2015, Texas Instruments Incorporated

Submit Documentation Feedback

9

Product Folder Links: TPD4F202 TPD6F202