поискавой системы для электроныых деталей |
|
TL431CLPRPG датащи(PDF) 3 Page - ON Semiconductor |
|
TL431CLPRPG датащи(HTML) 3 Page - ON Semiconductor |
3 / 18 page TL431A, B Series, NCV431A, B Series, SCV431A www.onsemi.com 3 THERMAL CHARACTERISTICS Characteristic Symbol D, LP Suffix Package P Suffix Package DM Suffix Package Unit Thermal Resistance, Junction−to−Ambient RqJA 178 114 240 °C/W Thermal Resistance, Junction−to−Case RqJC 83 41 − °C/W ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise noted.) Characteristic Symbol TL431I TL431C Unit Min Typ Max Min Typ Max Reference Input Voltage (Figure 1) VKA = Vref, IK = 10 mA TA = 25°C TA = Tlow to Thigh (Note 2) Vref 2.44 2.41 2.495 − 2.55 2.58 2.44 2.423 2.495 − 2.55 2.567 V Reference Input Voltage Deviation Over Temperature Range (Figure 1, Notes 3, 4) VKA= Vref, IK = 10 mA DVref − 7.0 30 − 3.0 17 mV Ratio of Change in Reference Input Voltage to Change in Cathode to Anode Voltage IK = 10 mA (Figure 2), DVKA = 10 V to Vref DVKA = 36 V to 10 V DV ref DV KA − − −1.4 −1.0 −2.7 −2.0 − − −1.4 −1.0 −2.7 −2.0 mV/V Reference Input Current (Figure 2) IK = 10 mA, R1 = 10 k, R2 = ∞ TA = 25°C TA = Tlow to Thigh (Note 2) Iref − − 1.8 − 4.0 6.5 − − 1.8 − 4.0 5.2 mA Reference Input Current Deviation Over Temperature Range (Figure 2, Note 3) IK = 10 mA, R1 = 10 k, R2 = ∞ DIref − 0.8 2.5 − 0.4 1.2 mA Minimum Cathode Current For Regulation VKA = Vref (Figure 1) Imin − 0.5 1.0 − 0.5 1.0 mA Off−State Cathode Current (Figure 3) VKA = 36 V, Vref = 0 V Ioff − 20 1000 − 20 1000 nA Dynamic Impedance (Figure 1, Note 5) VKA = Vref, DIK = 1.0 mA to 100 mA, f ≤ 1.0 kHz |ZKA| − 0.22 0.5 − 0.22 0.5 W Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Tlow = −40 °C for TL431AIP TL431AILP, TL431IP, TL431ILP, TL431BID, TL431BIP, TL431BILP, TL431AIDM, TL431IDM, TL431BIDM; =0 °C for TL431ACP, TL431ACLP, TL431CP, TL431CLP, TL431CD, TL431ACD, TL431BCD, TL431BCP, TL431BCLP, TL431CDM, TL431ACDM, TL431BCDM Thigh = +85°C for TL431AIP, TL431AILP, TL431IP, TL431ILP, TL431BID, TL431BIP, TL431BILP, TL431IDM, TL431AIDM, TL431BIDM = +70 °C for TL431ACP, TL431ACLP, TL431CP, TL431ACD, TL431BCD, TL431BCP, TL431BCLP, TL431CDM, TL431ACDM, TL431BCDM 3. Guaranteed by design. 4. The deviation parameter DVref is defined as the difference between the maximum and minimum values obtained over the full operating ambient temperature range that applies. DVref = Vref max -Vref min DTA = T2 - T1 T2 Ambient Temperature T1 Vref min Vref max The average temperature coefficient of the reference input voltage, aVref is defined as: V ref ppm _C + D V ref V ref @25 _C X106 D T A + D V ref x106 D T A (V ref @25 _C) aVref can be positive or negative depending on whether Vref Min or Vref Max occurs at the lower ambient temperature. (Refer to Figure 6.) Example : DV ref + 8.0 mV and slope is positive, V ref @25 _C + 2.495 V, DT A + 70 _C a V ref + 0.008 x 106 70 (2.495) + 45.8 ppm _C 5. The dynamic impedance ZKA is defined as: |ZKA| + D V KA D I K . When the device is programmed with two external resistors, R1 and R2, (refer to Figure 2) the total dynamic impedance of the circuit is defined as: |Z KA | [ |Z KA | 1 ) R1 R2 |
Аналогичный номер детали - TL431CLPRPG |
|
Аналогичное описание - TL431CLPRPG |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |