поискавой системы для электроныых деталей |
|
4--23715--7 датащи(PDF) 4 Page - Tyco Electronics |
|
4--23715--7 датащи(HTML) 4 Page - Tyco Electronics |
4 / 5 page 408- 9085 Terminating Head 58062- 1 Rev B 4 of 5 Tyco Electronics Corporation 5.2. Wire Guide If the connector cannot be inserted into the head, the connector is too loose in the head, or the connector housing is damaged after termination, refer to Figure 1, and adjust the wire guide as follows: 1. For pneumatic power units, disconnect the air supply. For electric power units, disconnect the electrical power supply. 2. Loosen the two screws on the wire guide. 3. Slide the wire guide until the connector fits properly in the head. 4. Finger--tighten the screws. 6. INSPECTION AND MAINTENANCE 6.1. Inspection Regular inspections should be performed by quality control personnel with a record of quality control inspections remaining with the personnel responsible for the head. One inspection per month is the recommended frequency; however, operator training and skill, amount of use, working conditions, and established company standards are all factors to be considered in establishing inspection frequency. 6.2. Daily Maintenance 1. Remove dust, moisture, and other contaminants with a clean, soft brush or lint--free cloth. DO NOT use objects that could damage the head. 2. Make sure that all components are in place and properly secured. 3. Make sure that the mechanisms inside the head function smoothly. 6.3. Periodic Maintenance 1. Remove any accumulated film with a suitable cleaning agent that will not affect plastic. 2. Check for chipped, cracked, worn, or broken areas on the head. If damage is evident, repair or replace the head. 7. REPLACEMENT AND REPAIR Customer--replaceable parts are listed in Figure 6. A complete inventory should be stocked and controlled to prevent lost time when replacement of parts is necessary. Parts other than those listed should be replaced by Tyco Electronics to ensure quality and reliability. Order replacement parts through your representative, or call 1--800--526--5142, or send a facsimile of your purchase order to 717--986--7605, or write to: CUSTOMER SERVICE (038--035) TYCO ELECTRONICS CORPORATION PO BOX 3608 HARRISBURG PA 17105--3608 For customer repair service, call 1--800--526--5136. 8. REVISION SUMMARY Revisions to this instruction sheet include S Updated document to corporate requirements |
Аналогичный номер детали - 4--23715--7 |
|
Аналогичное описание - 4--23715--7 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |