Tilt switches “make” when the electrode is tilted below horizontal and

“break” when tilted above the horizontal. Total travel from “make” to

“break” is the “Maximum included angle” shown below. The

component to which the switch is attached must have a total tilt angle

greater than the “Maximum included angle” for proper operation.

Part No: A1/2-001 – A1/2 Series

Tilt Switch - Mercury

American Electronic Components Inc.,

1101 Lafayette Street, Elkhart, Indiana. USA

Tel: +1-574-295-6330 Fax: +1-574-293-8013

Email: sales@aecsensors.com

http://www.aecsensors.com

© American Electronic Components Inc 2006

Specifications are subject to change without notice. E&OE.

A1/2-001 200606

Drawing dimensions in inches.

Features:

* Insulated

* Form: NO/NC/SPST/Mount dependent

* Angles Referenced from Horizontal

* Hermetically Sealed

* Small Package Size

* Narrow Included Angle

* High Current Capability

* Low Contact Resistance

* Long Life

Maximum included Angle* :

15º

* Switching occurs when body axis is near horizontal

Switch Ratings:

Max Switching Voltage

240V

Max Switching Current

120VAC / 1A: 240VAC / 0.4A, 120VDC /0.5A: 240VDC /

0.4A. Tungsten 120V / 60W

Initial Contact Resistance (Max).

80 milli Ohms

Stand Off Voltage (contact to contact)

(contact to ground)

1250V

1500V

Operating Temperature

-38º to 220º F / -38º to 105º C

Storage Temperature

-40º to 356º F / -40º to 180º C

Typical number of operations at specified load

10,000,000

G-Force Activation G-Level/Range

N/A

Dimensions:

Weight per 100pcs. Lbs / Kgs:

0.99 / 0.45

Body Length (less leads). Inches / Millimeters:

0.96 / 24.4

Maximum Diameter. Inches / Millimeters:

0.38 / 9.5

Materials:

Lead Wire Type

#26AWG PVC Insulated

Lead wire length/skive/termination

6 inches, spade terminals #6 screw

Finish:

Clip:

Case: PBT (30% Glass Filled)

Use P/N 0164 Mounting Clip