поискавой системы для электроныых деталей |
|
5--22280--4 датащи(PDF) 1 Page - Tyco Electronics |
|
5--22280--4 датащи(HTML) 1 Page - Tyco Electronics |
1 / 5 page Instruction Sheet Double Action Hand Tool (DAHT) Adapter Assembly 1213563-1 408--4485 LOC B 1 of 5 E 2010 Tyco Electronics Corporation, Berwyn, PA All Rights Reserved TE logo and Tyco Electronics are trademarks. *Trademark. Other products names, logos, or company names might be trademarks of their respective owners. TOOLING ASSISTANCE CENTER 1-- 800-- 722-- 1111 PRODUCT INFORMATION 1-- 800-- 522-- 6752 This controlled document is subject to change. For latest revision and Regional Customer Service, visit our website at www.tycoelectronics.com 17 MAR 10 Rev B (For Use With 626 Pneumatic Tooling Assemblies) Figure 1 Setscrew Adapter Cam Clevis Adapter Assembly Adapter Cavity Quick Pins (Supplied with Adapter Assembly) Typical DAHT Crimp Head (Ref) Mounting Holes Clevis 1. INTRODUCTION DAHT Adapter Assembly 1213563--1 is designed to accept the crimp head from any DAHT to adapt the crimp head for use with 626 pneumatic tooling assemblies. DAHTs are available from Tyco Electronics. For information concerning the setup and operation of the pneumatic tool, refer to Customer Manual 409--5862. This instruction sheet provides: — recommended procedures for crimp head removal from the hand tool — crimp head installation into the adapter — installation and removal of the cam and adapter from the pneumatic tool — maintenance, inspection, and repair information for the adapter For wire preparation and crimping procedure, and crimp head maintenance, inspection, and repair, refer to the associated instruction sheet. Read these instructions thoroughly before proceeding. Dimensions are in millimeters [with inch equivalents in brackets]. Figures and illustrations are for identification only and are not drawn to scale. Reasons for reissue of this instruction sheet are provided in Section 6, REVISION SUMMARY. 2. DESCRIPTION The adapter assembly facilitates the connection of the crimphead (typical showninFigure1) tothe pneumatic tool and provides the necessary motion of the crimp head jaws when the pneumatic tool is actuated. When the tool is actuated, the cam extends into the adapter, contacting the crimp head jaws. When the cam retracts, the force is removed from the jaws and they return to their starting position. The jaws may be opened and closed manually by simultaneously squeezing the two opposing clevises, which are coupled to the jaws. The quick pins secure the crimp head to the adapter. NOTE i |
Аналогичный номер детали - 5--22280--4 |
|
Аналогичное описание - 5--22280--4 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |