TS-SS-13-X.X Drawing

Status: Released

Drawing: Vinayak R

Scale: N/A

Rev: B

Date: 5/27/08

Modified: 8/10/09

File: TS-SS-13-X_X Dwg

TS-SS-13-X.X Drawing

Top View

Side View

© 2008 IRONWOOD ELECTRONICS, INC.

Tele: (952) 229-8200

www.ironwoodelectronics.com

Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.

Compression Screw Top: Clear anodized

Aluminum.

1

2

1

2

Compression Screw Bottom: Black anodized

Aluminum M6 x1x6g Thread.

Description:SS Type-Torque Indicating Screw

Torque screw for 0 in lbs -2.2 in lbs

To be used with Clamshell lid sockets.

Compression screw needs to be turned clockwise up to the point where the

arrow on top of the compression screw aligns with laser mark on the

compression screw bottom.

M6x1x6g.

Note: Screw needs to be calibrated for a specific torque.

Use part numbers shown in the table below to order appropriate screw

TS-SS-03-0.5

TS-SS-03-0.75

TS-SS-03-1.0

TS-SS-03-1.25

TS-SS-03-1.5

TS-SS-03-1.75

TS-SS-03-2

Ordering Information

Part Number

Torque (in. lbs)

0.5

0.75

1.0

1.25

1.5

1.75

2.0

Clamshell socket with Torque Indicating Screw

Ø 18.6

14.6

Laser Mark