поискавой системы для электроныых деталей |
|
TS1852 датащи(PDF) 3 Page - STMicroelectronics |
|
TS1852 датащи(HTML) 3 Page - STMicroelectronics |
3 / 24 page TS185x, TS185xA Absolute maximum ratings and operating conditions Doc ID 6991 Rev 4 3/24 1 Absolute maximum ratings and operating conditions Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCC Supply voltage (1) 1. All voltage values, except differential voltages, are with respect to network terminal. 7V Vid Differential input voltage(2) 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1 V, the maximum input current must not exceed ±1 mA. When Vid > ±1 V, add an input series resistor to limit the input current. ±1 V Vi Input voltage VCC- -0.3 to VCC+ +0.3 V Toper Operating free-air temperature range -40 to + 125 °C Tstg Storage temperature -65 to +150 °C Tj Maximum junction temperature 150 °C Rthja Thermal resistance junction to ambient (3) SOT23-5 miniSO-8 SO-8 SO-14 TSSOP8 TSSOP14 3. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short- circuits on all amplifiers. 250 190 125 103 120 100 °C/W Rthjc Thermal resistance junction to case SOT23-5 miniSO-8 SO-8 SO-14 TSSOP8 TSSOP14 81 39 40 31 37 32 °C/W ESD HBM: human body model(4) 4. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 k Ω resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 2kV MM: machine model(5) 5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while the other pins are floating. 200 V CDM: charged device model(6) 6. Charged device model: all pins and package are charged together to the specified voltage and then discharged directly to ground through only one pin. This is done for all pins. 1.5 kV Lead temperature (soldering, 10sec) 250 °C Output short-circuit duration See note(7) 7. Short-circuits from the output to VCC can cause excessive heating. The maximum output current is approximately 48 mA, independent of the magnitude of VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. |
Аналогичный номер детали - TS1852 |
|
Аналогичное описание - TS1852 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |