поискавой системы для электроныых деталей |
|
VT-706-F-F-H-207 датащи(PDF) 5 Page - Vectron International, Inc |
|
VT-706-F-F-H-207 датащи(HTML) 5 Page - Vectron International, Inc |
5 / 7 page Vectron International • 267 Lowell Road, Suite 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Page5 Absolute Maximum Ratings and Handling Precautions Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional operation is not implied or any other excess of conditions represented in the operational sections of this data sheet. Exposure to absolute maximum ratings for extended periods may adversely affect device reliability. Although ESD protection circuitry has been designed into the VT-706, proper precautions should be taken when handling and mounting, VI employs a Human Body Model and Charged Device Model for ESD susceptibility testing and design evaluation. ESD thresholds are dependent on the circuit parameters used to define the model. Although no industry standard has been adopted for the CDM a standard resistance of 1.5kOhms and capacitance of 100pF is widely used and therefor can be used for comparison purposes. Table 4. Maximum Ratings Parameter Symbol Rating Unit Storage Temperature T STORE -55/125 ºC Supply Voltage V DD -0.6/6 V Control Voltage V C -0.6/V DD+0.6 V Enable/Disable Voltage E/D -0.6/V DD+0.6 V ESD, Human Body Model 1500 V ESD, Charged Device Model 1000 V Maximum Ratings Table 5. Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002 Mechanical Vibration MIL-STD-883 Method 2007 Temperature Cycle MIL-STD-883 Method 1010 Solderability MIL-STD-883 Method 2003 Fine and Gross Leak MIL-STD-883 Method 1014 Resistance to Solvents MIL-STD-883 Method 2015 Moisture Sensitivity Level MSL1 Contact Pads Gold over Nickel Reliability Table 6. Reflow Profile Parameter Symbol Value PreHeat Time Ts-min Ts-max t s 200 sec Max 150°C 200°C Ramp Up R UP 3ºC/sec Max Time above 217C t L 150 sec Max Time to Peak Temperature t 25C to peak 480 sec Max Time at 260C t P 30 sec Max Time at 240C t P2 60 sec Max Ramp down R DN 6ºC/sec Max Suggested IR Profile Devices are built using lead free epoxy and can be subjected to standard lead free IR reflow conditions shown in Table 6. Contact pads are gold over nickel and lower maximum temperatures can also be used, such as 220°C. IR Reflow |
Аналогичный номер детали - VT-706-F-F-H-207 |
|
Аналогичное описание - VT-706-F-F-H-207 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |