SPECIFICATION

NO.

S-SC0006

PAGE

DATE

2000.9.18

10/10

5. NOTES

1. HANDLING

(ELECTROSTATIC DISCHARGES)

This device is made with CMOS circuitry. Please take precautions

to prevent damage due to electrical static discharge.

(SHOCK RELIABILITY)

This device contains a quartz crystal, so please do not give too much shock or vibration.

An automatic insersion is available, however, the internal quartz crystal might be damaged in

case that too much shock or vibration is given by machine condition. Be sure to check your

machine condition in advance.

(CLEANING)

Since, depending on the cleaning conditions,there is a possibility of damage being caused to

the Crystal Osillator,do not fail to test and confirm the results beforehand,using your

company's cleaning conditions.

　　

(TEMPERATURE AND HUMIDITY)

We recommend to store and use device under normal temperature and humidity.

When this device is used in high humidity applications, there is a potential problem with

condensation.

As with other IC's, please take precautions to prevent condensation.

　

2. CIRCUIT DESIGNS

(POWER LINES)

operation and protect against power line ripple .

(OE INPUT LINE)

(OUTPUT LINE)

As a long output line may cause irregular output, please take care to design that output line is

as short as possible, and also keep high level signal source away from this device.