поискавой системы для электроныых деталей |
|
S7BA-06E2AX датащи(PDF) 2 Page - Bel Fuse Inc. |
|
S7BA-06E2AX датащи(HTML) 2 Page - Bel Fuse Inc. |
2 / 7 page Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 4.5V-14V Input 0.75V-5.0V/6A Output Input Specifications Parameter Min Typ Max Notes Input Voltage Vo, set ≤ 3.3V Vo, set = 5.0V 4.5V 7.0V 12V 12V 14V 14V Input Current (full load) Vo=5.0V Vo=3.3V Vo=1.8V Vo=0.75V - - - - 2.75A 1.85A 1.05A 0.55A 4.8A 4.8A 3.2A 1.8A Input Current (no load) Vo=5.0V Vo=0.75V - - - - 100mA 20mA Remote Off Input Current - 3mA 5mA Input Reflected Ripple Current (pk-pk) - 120mA 200mA Input Reflected Ripple Current (RMS) - 60mA 100mA Tested with two 100uF/25V input Tantalum capacitors & simulated source impedance of 1uH, 5Hz to 20MHz. I 2t Inrush Current Transient - 0.002A 2s 0.02A 2s Turn-on Voltage Threshold Vo, set ≤ 3.3V Vo, set = 5.0V - - 4.3V 6.0V 4.5V 6.5V Turn-off Voltage Threshold Vo, set ≤ 3.3V Vo, set = 5.0V - - 4.0V 5.5V 4.3V 6.0V Shut down or below 90% set point. Output Specifications Parameter Min Typ Max Notes Output Voltage Set Point -2%Vo,set - 2%Vo,set Vin=12V, full load Output Voltage Set Point 1 -2.5%Vo,set - 3.5%Vo,set Load Regulation -0.7%Vo,set 0.4%Vo,set 0.7%Vo,set Io=Io, min to Io, max Line Regulation -0.7%Vo,set 0.3%Vo,set 0.7%Vo,set Vin=Vin, min to Vin, max Regulation Over Temperature (-40 °C to +85°C) - 0.5%Vo,set - Tref=Ta, min to Ta, max Output Current 0A - 6A Current Limit Threshold 6.8A - 15A Short Circuit Surge Transient - 0.25A 2s - Ripple and Noise (pk-pk) Vo=5.0V Vo=3.3V Vo=0.75V - - - 100mV 80mV 35mV 140mV 120mV 70mV Ripple and Noise (RMS) Vo=5.0V Vo=3.3V Vo=0.75V - - - 35mV 25mV 10mV 50mV 40mV 15mV Tested with 0-20MHz, with 10uF/10V tantalum capacitor & 1uF/10V ceramic capacitor at the output Turn on Time - 6mS 12mS Overshoot at Turn on - 0% 3% Output Capacitance ESR ≥ 1mohm ESR ≥ 10mohm 0uF 0uF - - 1000uF 2200uF Transient Response 50% ~ 100% Max Load - 200mV 350mV Settling Time - 25uS 50uS 100% ~ 50% Max Load - 200mV 350mV Settling Time VO = 0.75V -5.0V - 25uS 50uS di/dt=2.5A/uS; Vin=12V; and with 10uF/10V tantalum capacitor & 1uF/10V ceramic capacitor at the output. Notes : All specifications are typical at nominal input (Vin=12V), full load at 25°C unless otherwise stated. 1. Over all operating input voltages, resistive loads and temperature conditions. |
Аналогичный номер детали - S7BA-06E2AX |
|
Аналогичное описание - S7BA-06E2AX |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |