TPA032D02

10W STEREO CLASSD AUDIO POWER AMPLIFIER

SLOS243B − DECEMBER 1999 − REVISED JUNE 2000

4

POST OFFICE BOX 655303

Class-D amplifier faults

Table 1. Class-D Amplifier Fault Table

FAULT 0

FAULT 1

DESCRIPTION

1

1

No fault. The device is operating normally.

0

1

Charge pump under-voltage lock-out (VCP-UV) fault. All low-side transistors are turned on, shorting the load to

ground. Once the charge pump voltage is restored, normal operation resumes, but FAULT1 is still active. This is not

a latched fault, however. FAULT1 is cleared by cycling MUTE, SHUTDOWN, or the power supply.

0

0

Thermal fault. All the low-side transistors are turned on, shorting the load to ground. Once the junction temperature

drops 20

°C, normal operation resumes (not a latched fault). But the FAULTx terminals are still set and are cleared

by cycling MUTE, SHUTDOWN, or the power supply.

AVAILABLE OPTIONS

PACKAGED DEVICES

TA

TSSOP†

(DCA)

−40

°C to 125°C

TPA032D02DCA

† The DCA package is available in left-ended tape and reel. To order

a taped and reeled part, add the suffix R to the part number (e.g.,

TPA032D02DCAR).