FSYNC(out)

MSB

LSB

MSB

LSB

MSB

LEFT

RIGHT

SCK(out)

SDATA(in)

FSYNC(in)

MSB

LSB

MSB

LSB

MSB

LEFT

RIGHT

SCK(in)

SDATA(in)

FSYNC(in)

MSB

LSB

MSB

LSB

MSB

LEFT

RIGHT

SCK(in)

SDATA(in)

FORMAT 0:

FORMAT 1:

FORMAT 2:

(RESERVED)

FSYNC(in)

MSB

LSB

MSB

LSB

MSB

LEFT

RIGHT

SCK(in)

SDATA(in)

FSYNC(in)

LSB

MSB

LSB

SCK(in)

SDATA(in)

FORMAT 3:

FORMAT 4:

FORMAT 5:

LEFT

RIGHT

LSB

MSB

16 Bits

16 Bits

FSYNC(in)

LSB

MSB

LSB

SCK(in)

SDATA(in)

FORMAT 6:

LEFT

RIGHT

LSB

MSB

18 Bits

18 Bits

FSYNC(in)

MSB

LSB

MSB

SCK(in)

SDATA(in)

FORMAT 7:

LEFT

RIGHT

MSB

LSB

D97AU604

Figure 3. Audio Serial Port Formats.

C, U, V Serial Port

The serial input pins for channel status (C), user

(U), and validity (V) are sampled during the first

bit period after the active edge of FSYNC for all

formats except Format 4. Format 4 is sampled

during the second bit period (coincident with the

MSB). In Figure 3, the arrows on SCK indicate

when the C, U, and V bits are sampled. The C, U,

and V bits are transmitted with the audio sample

entered before FSYNC edge that sampled it. The

V bit, as defined in the audio standards, is set to

zero to indicate the audio data is suitable for con-

version to analog. Therefore, when the audio

data is errored, or the data is not audio, the V bit

should be set high. The channel status serial in-

put pin (C) is not available in consumer mode

when the CD subcode port is enabled (FC1 =

FC0 = high). Any channel status data entered

through the channel status serial input (C) is logi-

cally OR’ed with the data entered through the

dedicated pins or internally generated.

STA020D

6/11