поискавой системы для электроныых деталей |
|
STLM75M2F датащи(PDF) 9 Page - STMicroelectronics |
|
STLM75M2F датащи(HTML) 9 Page - STMicroelectronics |
9 / 37 page STLM75 Summary description 9/37 1.3 Pin descriptions See Figure 1 on page 7 and Table 1 on page 8 for a brief overview of the signals connected to this device. 1.3.1 SDA (open drain) This is the Serial Data Input/Output pin for the 2-wire serial communication port. 1.3.2 SCL This is the Serial Clock Input pin for the 2-wire serial communication port. 1.3.3 OS/INT (open drain) This is the Over-Limit Signal/Interrupt Alert Output pin. It is open drain, so it needs a pull-up resistor. In Interrupt mode, it outputs a pulse whenever the measured temperature exceeds the programmed threshold (TOS). It behaves as a thermostat, toggling to indicate whether the measured temperature is above or below the threshold and hysteresis (THYS). 1.3.4 GND Ground; it is the reference for the power supply. It must be connected to system ground. 1.3.5 A2, A1, A0 A2, A1, and A0 are selectable address pins for the 3 LSBs of the I2C interface address. They can be set to VDD or GND to provide 8 unique address selections. 1.3.6 VDD This is the supply voltage pin, and ranges from +2.7V to +5.5V. |
Аналогичный номер детали - STLM75M2F |
|
Аналогичное описание - STLM75M2F |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |