поискавой системы для электроныых деталей |
|
TLP2601 датащи(PDF) 2 Page - Toshiba Semiconductor |
|
TLP2601 датащи(HTML) 2 Page - Toshiba Semiconductor |
2 / 9 page TLP2601 2007-10-01 2 Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Input current, low level IFL 0 ⎯ 250 μA Input current, high level IFH 6.3 (*) ⎯ 20 mA Supply voltage**, output VCC 4.5 ⎯ 5.5 V High level enable voltage VEH 2.0 ⎯ VCC V Low level enable voltage VEL 0 ⎯ 0.8 V Fan out (TTL load) N ⎯ ⎯ 8 ⎯ Operating temperature Topr 0 ⎯ 70 °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. (*) 6.3mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value is 5.0mA or less. **This item denotes operating ranges, not meaning of recommended operating conditions. Absolute Maximum Ratings (no derating required) Characteristic Symbol Rating Unit Forward current IF 20 mA Reverse voltage VR 5 V Output current IO 25 mA Output voltage VO −0.5~7 V Supply voltage (1 minute maximum) VCC 7 V Enable input voltage (not to exceed VCC by more than 500mV) VE 5.5 V Output collector power dissipation Po 40 mW Operating temperature range Topr −40~85 °C Storage temperature range Tstg −55~125 °C Lead solder temperature (10s) (**) Tsol 260 °C 2500 Vrms Isolation voltage (R.H.≤ 60%,AC 1min., (Note 10) BVS 3540 Vdc Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (**) 1.6mm below seating plane. |
Аналогичный номер детали - TLP2601_07 |
|
Аналогичное описание - TLP2601_07 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |