поискавой системы для электроныых деталей |
|
TLP250 датащи(PDF) 2 Page - Toshiba Semiconductor |
|
TLP250 датащи(HTML) 2 Page - Toshiba Semiconductor |
2 / 7 page TLP250 2007-10-01 2 Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Forward current IF 20 mA Forward current derating (Ta ≥ 70°C) ΔIF / ΔTa −0.36 mA / °C Peak transient forward curent (Note 1) IFPT 1 A Reverse voltage VR 5 V Junction temperature Tj 125 °C “H”peak output current (PW ≤ 2.5μs,f ≤ 15kHz) (Note 2) IOPH −1.5 A “L”peak output current (PW ≤ 2.5μs,f ≤ 15kHz) (Note 2) IOPL +1.5 A (Ta ≤ 70°C) 35 Output voltage (Ta = 85°C) VO 24 V (Ta ≤ 70°C) 35 Supply voltage (Ta = 85°C) VCC 24 V Output voltage derating (Ta ≥ 70°C) ΔVO / ΔTa −0.73 V / °C Supply voltage derating (Ta ≥ 70°C) ΔVCC / ΔTa −0.73 V / °C Junction temperature Tj 125 °C Operating frequency (Note 3) f 25 kHz Operating temperature range Topr −20~85 °C Storage temperature range Tstg −55~125 °C Lead soldering temperature (10 s) Tsol 260 °C Isolation voltage (AC, 1 min., R.H.≤ 60%) (Note 4) BVS 2500 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pulse width PW ≤ 1μs, 300pps Note 2: Exporenential wavefom Note 3: Exporenential wavefom, IOPH ≤ −1.0A( ≤ 2.5μs), IOPL ≤ +1.0A( ≤ 2.5μs) Note 4: Device considerd a two terminal device: Pins 1, 2, 3 and 4 shorted together, and pins 5, 6, 7 and 8 shorted together. Note 5: A ceramic capacitor(0.1μF) should be connected from pin 8 to pin 5 to stabilize the operation of the high gain linear amplifier. Failure to provide the bypassing may impair the switching proparty. The total lead length between capacitor and coupler should not exceed 1cm. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Input current, on (Note6) IF(ON) 7 8 10 mA Input voltage, off VF(OFF) 0 ― 0.8 V Supply voltage VCC 15 ― 30 20 V Peak output current IOPH/IOPL ― ― ±0.5 A Operating temperature Topr −20 25 70 85 °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Note 6: Input signal rise time(fall time)<0.5 μs. |
Аналогичный номер детали - TLP250 |
|
Аналогичное описание - TLP250 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |