поискавой системы для электроныых деталей |
|
TLP251 датащи(PDF) 2 Page - Toshiba Semiconductor |
|
TLP251 датащи(HTML) 2 Page - Toshiba Semiconductor |
2 / 7 page TLP251 2007-10-01 2 Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Forward current IF 20 mA Forward current derating (Ta ≥ 70°C) ΔIF / ΔTa − 0.36 mA / °C Peak transient forward current (Note 1) IFPT 1 A Reverse voltage VR 5 V Junction temperature Tj 125 °C “H” peak output current (PW ≤ 2.0μs, f ≤ 15kHz) (Note 2) IOPH − 0.4 A “L” peak output current (PW ≤ 2.0μs, f ≤ 15kHz) (Note 2) IOPL 0.4 A (Ta ≤ 70°C) 35 Output voltage (Ta = 85°C) VO 24 V (Ta ≤ 70°C) 35 Supply voltage (Ta = 85°C) VCC 24 V Output voltage derating (Ta ≥ 70°C) ΔVO / ΔTa − 0.73 V / °C Supply voltage derating (Ta ≥ 70°C) ΔVCC / ΔTa − 0.73 V / °C Junction temperature Tj 125 °C Operating frequency (Note 3) f 25 kHz Operating temperature range Topr −20~85 °C Storage temperature range Tstg −55~125 °C Lead soldering temperature(10s) Tsol 260 °C Isolation voltage (AC, 1min., R.H.≤ 60%) (Note 4) BVS 2500 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pulse width PW ≤ 1μs, 300pps Note 2: Expornential waveform Note 3: Expornential waveform, IOPH ≤ −0.25A(≤ 2.0μs), IOPL ≤ +0.25A(≤2.0μs) Note 4: Device considerd a two terminal device: Pins 1, 2, 3 and 4 shorted together, and pins 5, 6, 7 and 8 shorted together. Note 5: A ceramic capacitor(0.1μF)should be connected from pin 8 to pin 5 to stabilize the operation of the high gain linear ampifier. Failure to provide the bypassing may impair the swiching property.The total lead length between capacitor and coupler should not exceed 1cm. |
Аналогичный номер детали - TLP251 |
|
Аналогичное описание - TLP251 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |