TC9243APG/AFG

2005-02-25

3

Operations

1.

Key Matrix

The TC9243APG and TC9243AFG enable the setting of a maximum of thirty-two (32) keys through combining

keys).

However, the simultaneous keying of either shift keys or normal keys is prohibited.

• The system code setting is done through the use of the diode jumper between the “CODE” lines and the

With the diode jumper, the data code will become “1”.

directly without using the diode jumper.

2.

Data Format

Note 1: “80H~8FH” out of the system codes are free codes.

Although freely available in principle, these codes may already be used by other equipment. There is,

therefore, a risk of interference occurring.

Other system codes have been customized and their general use is therefore prohibited.

Toshiba will assume no responsibility for interference and other problems that may result from the use of other

system codes.