поискавой системы для электроныых деталей |
|
M27W512-100F6TR датащи(PDF) 7 Page - STMicroelectronics |
|
M27W512-100F6TR датащи(HTML) 7 Page - STMicroelectronics |
7 / 16 page 7/16 M27W512 Table 9. Programming Mode DC Characteristics (1) (TA =25 °C; VCC = 6.25V ± 0.25V; VPP = 12.75V ± 0.25V) Note: 1. VCC must be applied simultaneously with or before VPP and removed simultaneously or after VPP. Table 10. MARGIN MODE AC Characteristics (1) (TA =25 °C; VCC = 6.25V ± 0.25V; VPP = 12.75V ± 0.25V) Note: 1. VCC must be applied simultaneously with or before VPP and removed simultaneously or after VPP. Symbol Parameter Test Condition Min Max Unit ILI Input Leakage Current VIL ≤ VIN ≤ VIH ±10 µA ICC Supply Current 50 mA IPP Program Current E=VIL 50 mA VIL Input Low Voltage –0.3 0.8 V VIH Input High Voltage 2 VCC + 0.5 V VOL Output Low Voltage IOL = 2.1mA 0.4 V VOH Output High Voltage TTL IOH = –1mA 3.6 V VID A9 Voltage 11.5 12.5 V Symbol Alt Parameter Test Condition Min Max Unit tA9HVPH tAS9 VA9 High to VPP High 2 µs tVPHEL tVPS VPP High to Chip Enable Low 2 µs tA10HEH tAS10 VA10 High to Chip Enable High (Set) 1 µs tA10LEH tAS10 VA10 Low to Chip Enable High (Reset) 1 µs tEXA10X tAH10 Chip Enable Transition to VA10 Transition 1 µs tEXVPX tVPH Chip Enable Transition to VPP Transition 2 µs tVPXA9X tAH9 VPP Transition to VA9 Transition 2 µs Programming The M27W512 has been designed to be fully com- patible with the M27C512 and has the same elec- tronic signature. As a result the M27W512 can be programmed as the M27C512 on the same pro- gramming equipment applying 12.75V on VPP and 6.25V on VCC. The M27W512 can use PRESTO IIB Programming Algorithm that drastically reduc- es the programming time. Nevertheless to achieve compatibility with all programming equipments, PRESTO II Programming Algorithm can be used as well. When delivered (and after each ‘1’s era- sure for UV EPROM), all bits of the M27W512 are in the ’1’ state. Data is introduced by selectively programming ’0’s into the desired bit locations. Al- though only ’0’s will be programmed, both ’1’s and ’0’s can be present in the data word. The only way to change a ‘0’ to a ‘1’s by die exposure to ultravi- olet light (UV EPROM). The M27W512 is in the programming mode when VPP input is at 12.75V and E is pulsed to VIL. The data to be programmed is applied to 8 bits in parallel to the data output pins. The levels required for the address and data inputs are TTL. VCC is specified to be 6.25V ± 0.25V. |
Аналогичный номер детали - M27W512-100F6TR |
|
Аналогичное описание - M27W512-100F6TR |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |