34

PCB Connectors

The PCB connector is used when a permanent connection of flat cable to the PC board is required.

The cable is terminated to the PCB connector making a reliable gas-tight connection with CW’s

patented Torq-Tite™ contacts. The connector’s pins are then soldered to the board.

CW’s PCB connectors are approved by the U.S. Defense Department and are qualified to

Mil-DTL-83503/23.

is available to protect

contacts if cable is pulled.

protective cover lip

for

cable end or daisy chain

applications.

keeps conductor under constant

tension. Assures a mechanically

and electrically sound, gas-tight

connection.

able to withstand bending

and straightening.

No exposure of unnecessary

sections of the contact and

possible shorting at the PC

board interface.