www.ti.com

Absolute Maximum Ratings

(1) (2)

TS5A23160

0.9-

Ω DUAL SPDT ANALOG SWITCH

5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER

SCDS210A – AUGUST 2005 – REVISED APRIL 2006

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

–0.5

6.5

V

–0.5

V

Analog port diode current

–50

50

mA

On-state switch current

–200

200

mA

–400

400

–0.5

6.5

V

Digital input clamp current

–50

mA

Continuous current through V+

100

mA

Continuous current through GND

–100

100

mA

θ

JA

165

°C/W

Storage temperature range

–65

150

°C

(1)

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may

degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond

those specified is not implied.

(2)

The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum

(3)

All voltages are with respect to ground, unless otherwise specified.

(4)

The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

(5)

This value is limited to 5.5 V maximum.

(6)

Pulse at 1-ms duration < 10% duty cycle

(7)

The package thermal impedance is calculated in accordance with JESD 51-7.

3

Submit Documentation Feedback