FM1105 - Automotive Temp.
Rev. 3.0
Apr. 2009
Page 4 of 8
Electrical Specifications
Absolute Maximum Ratings
Symbol
Description
Ratings
VDD
Power Supply Voltage with respect to VSS
-1.0V to +7.0V
VIN
Voltage on any signal pin with respect to VSS
-1.0V to +7.0V
and VIN < VDD+1.0V
TSTG
Storage temperature
-55
°C to + 125°C
TLEAD
Lead temperature (Soldering, 10 seconds)
300
° C
VESD
Electrostatic Discharge Voltage
- Human Body Model (JEDEC Std JESD22-A114-B)
- Charged Device Model (JEDEC Std JESD22-C101-A)
- Machine Model (JEDEC Std JESD22-A115-A)
4kV
1kV
200V
Package Moisture Sensitivity Level
MSL-1
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating
only, and the functional operation of the device at these or any other conditions above those listed in the operational section of this
specification is not implied. Exposure to absolute maximum ratings conditions for extended periods may affect device reliability.
DC Operating Conditions (TA = -40° C to +125° C, VDD = 4.5V to 5.5V unless otherwise specified)
Symbol
Parameter
Min
Typ
Max
Units
Notes
VDD
Power Supply Voltage
4.5
5.0
5.5
V
ISB
Standby Current
@
+85
°C
@
+125
°C
-
-
15
20
µA
µA
1
CPD
Power Dissipation Capacitance
-
165
pF
2
ILI
Input Leakage Current
±1
µA
3
ILO
Output Leakage Current
±1
µA
3
VIL
Input Low Voltage
-0.3
0.3 VDD
V
VIH
Input High Voltage
0.7 VDD
VDD + 0.3
V
VOH
Output High Voltage
@
IOH = -1 mA
VDD – 0.5
-
V
VOL
Output Low Voltage
@
IOL = 1 mA (VDD=4.5V)
@
IOL = 10 mA (VDD=4.5V)
-
-
0.4
0.8
V
V
VHYS
Input Hysteresis (CLK, EN)
150
mV
4
Notes
1. CLK = VSS, all other inputs at VDD or VSS.
2. To calculate device power dissipation, PD = CPD*VDD2*fi + CL*VDD2*fo, where fi is the input clk freq, fo is the output freq,
and CL is the output load capacitance. Active current IDD may be calculated as IDD = CPD*VDD*fi, assuming outputs are
floating.
3. VIN or VOUT = VSS to VDD.
4. This parameter is characterized but not tested.
Capacitance (TA = 25° C , f=1.0 MHz, VDD = 5.0V)
Symbol
Parameter
Min
Max
Units
Notes
CI
Input Capacitance
-
8
pF
1
Notes
1.
This parameter is characterized but not tested.