поискавой системы для электроныых деталей |
|
LC72346W датащи(PDF) 8 Page - Sanyo Semicon Device |
|
LC72346W датащи(HTML) 8 Page - Sanyo Semicon Device |
8 / 12 page No. 6651-8/12 LC72346W, 72347W Continued from preceding page. Pin No. Pin I/O Function I/O circuit General-purpose input and A/D converter input shared function ports. The IOS instruction (Pwn = FH) is used to switch between the general-purpose input and A/D converter port functions. The general-purpose input and A/D converter port functions can be switched in a units, with 0 specifying general-purpose input, and 1 specifying the A/D converter input function. To select the A/D converter function, set up the A/D converter pin with an IOS instruction with Pwn set to 1. The A/D converter is started with the UCC instruction (b3 = 1, b2 = 1). The ADCE flag is set when the conversion completes. The INR instruction is used to read in the data. *: If an input instruction is executed for one of these pins which is set up for analog input, the read in data will be at the low level since CMOS input is disabled. In backup mode these pins go to the input disabled high-impedance state. These ports are set to their general-purpose input port function after a reset. The A/D converter is a 6-bit successive approximation type converter, and features a conversion time of 1.28 ms. Note that the full-scale A/D converter voltage (3FH) is (63/96) VDD. 23 22 21 PF0/ADI0 PF1/ADI1 PF2/ADI3 I CMOS input/analog input LCD driver segment output and general-purpose I/O shared function ports. The IOS instruction is used for switching between the segment output and general- purpose I/O functions and between input and output for the general-purpose I/O port function. • When used as segment output ports The general-purpose I/O port function is selected with the IOS instruction (Pwn = 8). b0 = S17 to 20/PG0 to 3 (0: Segment output, 1: PG0 to 3) The general-purpose I/O port function is selected with the IOS instruction (Pwn = 9). b0 = S13 to 16/PH0 to 3 (0: Segment output, 1: PH0 to 3) • When used as general-purpose I/O ports The IOS instruction (Pwn = 6,7) is used to select input or output. Note that the mode can be set in a bit units. b0 = PG0 b0 = PH0 b1 = PG1 0: Input b1 = PH1 0: Input b2 = PG2 1: Output b2 = PH2 1: Output b3 = PG3 b3 = PH3 In backup mode, these pins go to the input disabled high-impedance state if set up as general-purpose outputs, and are fixed at the low level if set up as segment outputs. These ports are set up as segment outputs after a reset. Although the general-purpose port/LCD port setting is a mask option, the IOS instruction must be used as described above to set up the port function. 33 34 35 36 37 38 39 40 PG3/S20 PG2/S19 PG1/S18 PG0/S17 PH3/S16 PH2/S15 PH1/S14 PH0/S13 *2 O CMOS push-pull LCD driver segment output pins. A 1/4-duty 1/2-bias drive technique is used. The frame frequency is 75 Hz. In backup mode, these outputs are fixed at the low level. After a reset, these outputs are fixed at the low level. 41 to 52 S12 to S1 O LCD driver common output pins. A 1/4-duty 1/2-bias drive technique is used. The frame frequency is 75 Hz. In backup mode, these outputs are fixed at the low level. After a reset, these outputs are fixed at the low level. 53 54 55 56 COM4 COM3 COM2 COM1 O CMOS push-pull Continued on next page. |
Аналогичный номер детали - LC72346W |
|
Аналогичное описание - LC72346W |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |