www.berex.com

BeRex, Inc. 1735 North 1

September 2011

Specifications are subject to change without notice. ©BeRex 2011

Rev. 1.2

BCP080T

WIRE BONDING INFORMATION

Using 1 mil. diameter, Au bonding wires.

1. Gate to input transmission line

- Length and Height : 600 µm x 250 µm

- Number of wire(s): 1

2. Drain to output transmission line

- Length and Height : 400 µm x 250 µm

- Number of wire(s) : 1

3. Source to ground plate

- Length and Height : 250 µm x 300 µm

- Number of wire(s) : 4

DISCLAIMER

BEREX RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN. BEREX DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE

OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN.

LIFE SUPPORT POLICY

BEREX PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES WITHOUT THE

EXPRESS WRITTEN APPROVAL OF BEREX.

1.

Life support devices or systems are devices or systems which (a) are intended for surgical implant into the body, or

(b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use

provided in labeling, can be reasonably expected to result in significant injury to the user.

2.

A critical component is any component of a life support device or system whose failure to perform can be reasonably

expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.