5

Noise peak-to-peak

3% of full scale or 5 mV, whichever is greater

DC vertical offset accuracy

± 0.1% div ± 2 mV ± 0.5% offset value

Single cursor accuracy

4% full scale

Dual cursor accuracy

4% full scale

Horizontal System

Range

U1602A/U1602B: 50 ns to 50 s/div

U1604A/U1604B: 10 ns to 50 s/div

Resolution

U1602A/U1602B: 2 ns

U1604A/U1604B: 400 ps

Reference position

Left, center, right

Delay range (pre-trigger)

15 divisions

Delay range (post-trigger)

1000 divisions

Analog Dt accuracy

± 3% reading ± 0.4% screen

Modes

Main, XY, Roll

RMS Jitter

5% of horizontal scale or 5 ns, whichever is higher

Trigger System

Source

Channel 1 and Channel 2

Modes

Auto, normal, single

Selections

Edge

Pattern

Pulse Width

Video

Edge, pulse width, pattern, video

Trigger on a rising or falling edge of any source

Trigger at the beginning of a pattern of high, low levels and rising or falling

edge established conditions of AND, OR, NOR and NAND between the

channels.

200 ns to 10 s. Trigger when a positive or negative pulse width of any source

larger than, less than, equal to or not equal to duration.

Video trigger sensitivity: 0.7 division trigger level.

Available to both Channel 1 and Channel 2.

Analog progressive and interlaced video standards including NTSC,

PAL and SECAM.

Positive or negative sync pulse polarity.

Modes – all fields, even fields, odd fields or line 5 – 263 within a field.

Range

± 4 divisions from center screen

Level accuracy

± 0.5 divisions

Trigger sensitivity

DC to 5 MHz: 0.8 divisions

U1602A/U1602B: 5 MHz to 20 MHz – 1 division

U1604A/U1604B: 5 MHz to 40 MHz – 1 division

Coupling

DC, AC (< 1 Hz), HF reject (> 50 kHz), LF reject (< 30 kHz), Noise reject

Probe attenuation factors

1x, 10x, 100x

Coupling

3 Vp-p, ~ 1 kHz

Maximum probe input

1x CAT III 300 VAC

10 x, 100x CAT III 600 VAC

Probes

U1560-60001: 1:1 passive probe

U1561-60001: 10:1 passive probe

U1562-60001: 100:1 passive probe