поискавой системы для электроныых деталей |
|
TLP700 датащи(PDF) 2 Page - Toshiba Semiconductor |
|
TLP700 датащи(HTML) 2 Page - Toshiba Semiconductor |
2 / 17 page TLP700 2010-02-23 2 Absolute Maximum Ratings (Ta = 25 °C) Characteristics Symbol Rating Unit Forward current IF 20 mA Forward current derating (Ta ≥ 85°C) ΔIF/ΔTa −0.54 mA/°C Peak transient forward current (Note 1) IFP 1 A Reverse voltage VR 5 V Junction temperature Tj 125 °C “H” peak output current IOPH −2.0 A “L” peak output current Ta=-40 to 100 °C (Note 2) IOPL 2.0 A Output voltage VO 35 V Supply voltage VCC 35 V Junction temperature Tj 125 °C Operating frequency (Note 3) f 50 kHz Operating temperature range Topr −40 to 100 °C Storage temperature range Tstg −55 to 125 °C Lead soldering temperature (10 s) (Note 4) Tsol 260 °C Isolation voltage (AC, 1 minute, R.H. ≤ 60%) (Note 5) BVS 5000 Vr m s Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pulse width PW ≤ 1 μs, 300 pps Note 2: Exponential waveform pulse width PW ≤ 0.3 μs, f ≤15 kHz Note 3: Exponential waveform IOPH ≥−1.5 A (≤ 0.3 μs), IOPL ≤+1.5 A (≤ 0.3 μs), Ta=100°C Note 4: For the effective lead soldering area Note 5: Device considered a two-terminal device: pins 1, 2 and 3 paired with pins 4, 5 and 6 respectively. Note 6: A ceramic capacitor (0.1 μF) should be connected from pin 6 to pin 4 to stabilize the operation of the high gain linear amplifier. Failure to provide the bypassing may impair the switching property. The total lead length between capacitor and coupler should not exceed 1 cm. Recommended Operating Conditions Characteristics Symbol Min Typ. Max Unit Input current, ON (Note 7) IF (ON) 7.5 ⎯ 10 mA Input voltage, OFF VF (OFF) 0 ⎯ 0.8 V Supply voltage * (Note 8) VCC 15 ⎯ 30 V Peak output current IOPH / IOPL ⎯ ⎯ ± 1.5 A Operating temperature Topr −40 ⎯ 100 °C * This item denotes operating ranges, not meaning of recommended operating conditions. Note : Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Note 7: Input signal rise time (fall time) ≤ 0.5 μs. Note 8: If the Vcc rise slope is sharp, an internal circuit might not operate with stability. Please design the Vcc rise slope under 3.0 V/ μs. |
Аналогичный номер детали - TLP700 |
|
Аналогичное описание - TLP700 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |