поискавой системы для электроныых деталей |
|
VRG8660-201-2S датащи(PDF) 2 Page - Aeroflex Circuit Technology |
|
VRG8660-201-2S датащи(HTML) 2 Page - Aeroflex Circuit Technology |
2 / 6 page 2 SCD8660 Rev F 4/12/12 Aeroflex Plainview ABSOLUTE MAXIMUM RATINGS PARAMETER RANGE UNITS Lead temperature (soldering 10 Sec)DC 300 °C Input-Output Voltage Differential 40 VDC ESD 1.999 1/ KV Operating Junction Temperature Range -55 to +150 °C Storage Temperature Range -65 to +150 °C 1/ Meets ESD testing per MIL-STD-883, method 3015, Class 1C. NOTICE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress rating only; functional operation beyond the "Operation Conditions" is not recommended and extended exposure beyond the "Operation Conditions" may effect device reliability. RECOMMENDED OPERATING CONDITIONS PARAMETER RANGE UNITS Output Voltage Range 1.25 to 37 VDC Case Operating Temperature Range -55 to +125 °C ELECTRICAL PERFORMANCE CHARACTERISTICS Unless otherwise specified -55°C < TC < +125°C & (VIN-VOUT) = 5V, IOUT = 0.5A PARAMETER SYM CONDITIONS (P PMAX) MIN MAX UNITS Reference Voltage 1/ 5/ VREF 3V < (VIN - VOUT) < VDIFF MAX, 10mA < IOUT < IMAX 1.20 1.30 V Line Regulation 1/ 2/3V < (VIN - VOUT) < VDIFF MAX, IOUT = 10mA -0.06 %/V Load Regulation 1/ 2/10mA < IOUT < IMAX, VOUT < 5V - 60 mV 10mA < IOUT < IMAX, VOUT > 5V - 1.2 % Thermal Regulation - IOUT = 1.5A, (VIN - VOUT) = 13.3V, 20ms Pulse, 20W, TC = +25°C - 0.07 %/W Ripple Rejection Ratio - VOUT = 10V, f = 120Hz, CADJ = 10µF 66 - dB Adjustment Pin Current 1/ IADJ - - 100 µA Adjustment Pin Current Change 1/ IADJ 10mA < IOUT < IMAX -5 µA 3V < (VIN - VOUT) < 40V, Minimum Load Current 1/ 3/ IMIN (VIN - VOUT) = 40V - 5 mA Current Limit 1/ 4/ IMAX (VIN - VOUT) < 15V 1.50 - A (VIN - VOUT) = 40V, TC = +25°C 0.30 - Long Term Stability 3/ TA = +125°C - 1 % Thermal Resistance (Junction to Case) 3/ JC - -3 °C/W Notes: 1/ Specification derated to reflect Total Dose exposure to 100Krad (Si) @ +25°C. 2/ Regulation is measured at a constant junction temperature, using pulse testing with a low duty cycle. Changes in output voltage due to heating effects are covered under the specification for thermal regulation. Measurements taken at the output lead must be adjusted for lead resistance. 3/ Not tested. Shall be guaranteed to the specified limits. 4/ Pulsed at <10% duty cycle @ 25°C. 5/ Testing over 12 watts is not performed over + 25°C. VOUT VIN VOUT IOUT VOUT TIME |
Аналогичный номер детали - VRG8660-201-2S |
|
Аналогичное описание - VRG8660-201-2S |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |