поискавой системы для электроныых деталей |
|
TLP5214 датащи(PDF) 3 Page - Toshiba Semiconductor |
|
TLP5214 датащи(HTML) 3 Page - Toshiba Semiconductor |
3 / 20 page TLP5214 2015-12-26 3 Absolute Maximum Ratings (Note) (Ta = 25°C ,Unless otherwise specified) Characteristics Symbol Rating Unit LED Input forward current IF 25 mA Input forward current derating (Ta ≥ 95°C) ∆IF/∆Ta −1 mA/°C Peak transient input forward current (Note 1) IFPT 1 A Peak transient input forward current derating (Ta ≥ 95°C) ∆IFPT/∆Ta −25 mA/°C Reverse Input Voltage VR 6 V Input power dissipation PD 145 mW Input power dissipation derating (Ta ≥ 95°C) ∆ PD /∆Ta −5.0 mW/°C Detector Positive Input Supply Voltage VCC1 −0.5 to 7 V “H” peak output current Ta = −40 to 110 °C (Note 2) IOPH −4.0 A “L” peak output current IOPL +4.0 A FAULT Output Current IFAULT 8 mA FAULT Pin Voltage VFAULT −0.5 to V CC1 V Total Output Supply Voltage (VCC2 −V EE) −0.5 to 35 V Negative Output Supply Voltage (VE −V EE) -0.5 to 15 V Positive Output Supply Voltage (VCC2 −V E) −0.5 to 35 − (V E −V EE) V Output voltage VO −0.5 to V CC2 V Peak Clamping Sinking Current IClamp 1.7 A Miller Clamping Pin Voltage VClamp −0.5 to V CC2 V DESAT Voltage VDESAT VE to VE + 10 V Output power dissipation PO 410 mW Output power dissipation (Ta ≥ 95°C) ∆ PO /∆Ta −14.0 mW/°C Common Operating temperature range Topr −40 to 110 °C Storage temperature range Tstg −55 to 125 °C Lead soldering temperature (10 s) (Note 3) Tsol 260 °C Isolation voltage (AC, 60 s, R.H. ≤ 60%) (Note 4) BVS 5000 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note: A ceramic capacitor (1 μF) should be connected between pins 9 and 13, pins 13 and 16 to stabilize the operation of the high gain linear amplifier.Furthermore, in case VE-VEE > 0 V, a bypass capacitor, which has good high frequency characteristic, a ceramic capacitor (1 μF) should be connected between pins 9 and 16. Failure to provide the bypassing may impair the switching property. The total lead length between capacitor and coupler should not exceed 1 cm. Note 1: Pulse width PW ≤ 1 μs, 300 pps Note 2: Exponential waveform pulse width PW ≤ 0.2 μs, f ≤ 15 kHz, VCC = 15 V Note 3: For the effective lead soldering area. Note 4: This device considered a two-terminal device: All pins on the LED side are shorted together, and all pin on the photodetector side are shorted together. |
Аналогичный номер детали - TLP5214 |
|
Аналогичное описание - TLP5214 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |