поискавой системы для электроныых деталей |
|
TLP117 датащи(PDF) 2 Page - Toshiba Semiconductor |
|
TLP117 датащи(HTML) 2 Page - Toshiba Semiconductor |
2 / 7 page TLP117 2014-09-01 2 Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Forward current IF 25 mA Forward current derating (Ta≥85 °C) ∆IF/∆Ta -0.7 mA/ °C Peak transient forward current (Note 1) IFPT 1 A Reverse voltage VR 6 V Output current IO 10 mA Output voltage VO 6 V Supply voltage VCC 6 V Output power dissipation PO 40 mW Operating temperature range Topr -40 to 105 °C Storage temperature range Tstg -55 to 125 °C Lead solder temperature(10s) Tsol 260 °C Isolation voltage (AC,1 minute, R.H. ≤ 60%, Ta=25 °C) (Note 2) BVs 3750 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pulse width PW≤1 μs, 300 pps. Note 2: This device is regarded as a two-terminal device: pins 1 and 3 are shorted together, and pins 4,5 and 6 are shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Input current , ON IF(ON) 10 — 16 mA Input voltage , OFF VF(OFF) 0 — 1.0 V Supply voltage(*) (Note 3) VCC 4.5 5.0 5.5 V * This item denotes operating ranges, not meaning of recommended operating conditions. Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Note 3: The detector of this product requires a power supply voltage (VCC) of 4.5 V or higher for stable operation. If VCC is lower than this value, ICC may increase or the output may be unstable. Be sure to use the product after checking the supply current, and the operation of a power-on/-off. |
Аналогичный номер детали - TLP117_14 |
|
Аналогичное описание - TLP117_14 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |