поискавой системы для электроныых деталей |
|
SI5380 датащи(PDF) 9 Page - Silicon Laboratories |
|
SI5380 датащи(HTML) 9 Page - Silicon Laboratories |
9 / 53 page 3.2 External Reference (XA/XB) An external crystal (XTAL) is used in combination with the internal oscillator (OSC) to produce an ultra-low phase noise reference clock for the DSPLL and for providing a stable reference for the free-run and holdover modes. A simplified diagram is shown in the figure below. The Si5380 includes internal XTAL loading capacitors which eliminates the need for external capacitors and also has the benefit of reduced noise coupling from external sources. Refer to the Table 5.12 Crystal Specifications on page 34 for crystal specifications. A crystal frequency of 54 MHz is required, with a total accuracy of ±100 ppm* recommended for best performance. The Si5380 includes built-in XTAL load capacitors (CL) of 8 pF, which are switched out of the circuit when using an external XO. The Si5380 Reference Manual provides additional information on PCB layout recommendations for the crystal to ensure optimum jitter performance. To ach- ieve optimal jitter performance and minimize BOM cost, a crystal is recommended on the XA/XB reference input. A clock (e.g., XO) may be used in lieu of the crystal, but it may result in higher output jitter. See the Si5380 Reference Manual for more information. Selection between the external XTAL or REFCLK is controlled by register configuration. The internal crystal loading capacitors (CL) are disabled in this mode. It is important to note that when using the REFCLK option the phase noise of the outputs is directly affected by the phase noise of the external XO reference. Refer to the Table 5.3 Input Clock Specifications on page 24 for REFCLK requirements when using the REFCLK mode. Note: Including initial frequency tolerance and frequency variation over the full operating temperature range, voltage range, load condi- tions, and aging. OSC XB XA 54MHz XTAL 2xCL 2xCL Crystal Resonator Connection OSC XB XA 54MHz XO 100 Differential XO Connection OSC XB XA 54MHz XO Single-Ended XO Connection 2xCL 2xCL 2xCL Si5380 Si5380 Si5380 2xCL ÷PREF ÷PREF ÷PREF Figure 3.4. XAXB Crystal Resonator and External Reference Clock Connection Options 3.3 Inputs (IN0, IN1, IN2, IN3/FB_IN) Four clock inputs are available to synchronize the DSPLL. The inputs are compatible with both single-ended and differential signals. Input selection can be manual (pin or register controlled) or automatic with definable priorities. Si5380 Rev D Data Sheet Functional Description silabs.com | Smart. Connected. Energy-friendly. Rev. 1.0 | 8 |
Аналогичный номер детали - SI5380_16 |
|
Аналогичное описание - SI5380_16 |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |