поискавой системы для электроныых деталей |
|
TS9224IDT датащи(PDF) 3 Page - STMicroelectronics |
|
TS9224IDT датащи(HTML) 3 Page - STMicroelectronics |
3 / 16 page DocID15718 Rev 5 3/16 TS9222, TS9224 Absolute maximum ratings and operating conditions 16 1 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings (AMR) Symbol Parameter Value Unit VCC Supply voltage(1) 1. All voltage values, except differential voltage are with respect to network ground terminal. 14 V Vid Differential input voltage(2) 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1 V, the maximum input current must not exceed ±1 mA. In this case (Vid > ±1 V), an input series resistor must be added to limit input current. ±1 Vin Input voltage(3) 3. Do not exceed 14 V. VCC- -0.3 to VCC+ +0.3 Tstg Storage temperature -65 to +150 °C Rthja Thermal resistance junction to ambient(4) SO8 TSSOP8 SO14 TSSOP14 4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short- circuits on all amplifiers. These values are typical. 125 120 66 100 °C/W Tj Maximum junction temperature 150 °C ESD TS9222 HBM: human body model(5) 5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5k Ω resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 2000 V MM: machine model(6) 6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while the other pins are floating. 120 CDM: charged device model(7) 7. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. 1500 ESD TS9224 HBM: human body model(5) 3kV MM: machine model(6) 100 V CDM: charged device model(7) SO14 TSSOP14 1.5 1 kV Output short circuit duration see note(8) 8. There is no short-circuit protection inside the device: short-circuits from the output to VCC can cause excessive heating. The maximum output current is approximately 80mA, independent of the magnitude of VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. Latch-up immunity 200 mA Soldering temperature (10 sec), unleaded version 260 °C |
Аналогичный номер детали - TS9224IDT |
|
Аналогичное описание - TS9224IDT |
|
|
ссылки URL |
Конфиденциальность |
ALLDATASHEETRU.COM |
Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |